AT command
အခု ေခတ္က adb ေခတ္ မဟုတ္ေတာ့ဘူး
AT ေခတ္ကို ေရာက္လာျပီး
adb command ေလာက္ တတ္တာနဲ့ သိပ္ ျပီး အလုပ္မျဖစ္ေတာ့ဘူး
AT command ကို ေလ့လာဖို ့လိုလာပါျပီး
AT Commands-Tutorial
AT_Commands-Tutorial.mp4, Size 102.63 MB...
http://d-h.st/
https://userscloud.com/
AT command
သံုး ျပီး ဘာလုပ္လို့ မရလဲ
computer က ေန at command သံုး ျပီးေတာ့
ဖုန္း ေခၚလို ့ရမယ္ message ပို ့လို့ရမယ္
message ၾကည့္လို့ ရမယ္ phone လက္ခံလို ့ရမယ္
စသျဖင့္ ေပါ ့
computer က ေန ရိုက္ဖို ့ putty ဆိုတဲ့ ဟာေ လး လုိမယ္
သူ က ေတာ့ com port က ေနတဆင့္
at command ရိုက္ျပီး phone modem ကို control လုပ္တာပါဘဲ
com port ေတြကေန at command ရိုက္ရင္ သံုး ဖို ့
putty.exe
518.91 KB
http://d-h.st/
https://userscloud.com/
portable_putty_062_050_all_in_one.zip
(965.13 KB)
portable_putty_063_060_all_in_one.zip
(971.06 KB)
portable_putty_063_061_all_in_one.zip
(971.05 KB)
portable_putty_064_070_all_in_one.zip
(1.05 MB)
portable_putty_065_080_all_in_one.zip
(1.06 MB)
putty.exe
(618.00 KB)
putty.collection.rar 6.13 MB
http://d-h.st/
https://userscloud.com/
read more
putty ေလး ယူထားလိုက္
အသံုး အမ်ားဆံုး command မ်ား ဖတ္ရန္ http://sh.st/JT5ur
===========
ေ၀ါဟာရနဲ့ သံုးနညး္
ဆိုလိုရင္းကို ဖတ္ရန္ http://sh.st/JT5f8
-----------
=========
AT!GRESET or AT!RESET
use AT+CLAC to get the modem's available commands
and search for some kind of RESET/RST command.
If you can't find a reset command, try turning off
and on the modem radio using AT+CFUN=0 and AT+CFUN=1.
==========
Resetting the modem is a manufacturer-specific AT
command.
There is a spec available online for Huawei AT
commands here.
Look at section 3.10 +CFUN
The
EXECUTION command is used to set the MS mode or restart the MS
AT+CFUN has 2 parameters:
AT+CFUN=[fun[,rst]]
These 2 parameters fun and rst are defined as
follows:
fun:
0 Set as
minimum functionality mode (set the RF off but keep the SIM power on, previous
mode must not be offline)
1 Set as online
mode (default value) (previous mode must not be offline)
4 Set as
offline mode (previous mode must not be FTM)
5 Set as
offline FTM (previous mode must be online)
6 Reset MS
(previous mode must be offline)
7 Set as
RFoff mode (about radio frequency)
rst:
Whether to restart MS before setting
0 Not
restart MS before setting. (Default)
1 Restart
MS before setting. (fun must be 1)
===================
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.